TX and RX errors or RAS ethernet port

labapx>show

Controller { right-controller } ( PRIMARY ):

Reqd Oper Slot Type

{ left-controller } UP UP ( SECONDARY )

{ shelf-1 slot-11 0 } UP UP 8e1-card

{ shelf-1 slot-12 0 } UP UP 8e1-card

{ shelf-1 slot-13 0 } UP UP 8e1-card

{ shelf-1 slot-14 0 } DOWN RESET madd2-card

{ shelf-1 slot-15 0 } UP UP madd2-card

{ shelf-1 slot-16 0 } UP UP madd2-card

{ shelf-1 slot-17 0 } UP UP madd2-card

{ shelf-1 slot-18 0 } UP UP madd2-card

{ shelf-1 slot-20 0 } UP UP ether3nd-card

{ shelf-1 slot-40 0 } UP UP ether3nd-card

cwam-t-006>open 20

Step 2, Find out the logic interface number for the physical ports

ether3nd-1/20> ifmgr -d

if slot:if u p ifname mac addr local-addr

----------------------------------------------------------------

000 0:00:000 * pb0 00:00:00:00:00:00 0.0.0.0/32

002 1:42:587 * ie1-20-2 00:d0:52:04:70:b1 203.22.111.20/25

003 1:42:588 * ie1-20-3 00:d0:52:04:70:b2 0.0.0.0/0

004 1:42:589 * ie1-20-4 00:d0:52:04:70:b3 192.168.201.8/24

009 1:20:009 * lo0 00:00:00:00:00:00 127.0.0.1/32

010 1:20:000 * rj0 00:00:00:00:00:00 127.0.0.2/32

011 1:20:000 * bh0 00:00:00:00:00:00 127.0.0.3/32

012 0:00:000 * local 00:00:00:00:00:00 127.0.0.1/32

Step 3, Check the stastics

ether3nd-1/20> ifstat 2

Octets Unicast Multicast Broadcast Discards Errors UnkProto

IF 2 : ie1-20-2

In: 5040460 82642 0 0 655 0 8

Out: 0 0 0 0 0 0